When it comes to holding rolls of trash bags, it just so pvc socket happens the cardboard boxes they come in are not very efficient. Boxes get beaten up, torn open, and trash bags unravel if enough care isn’t taken when tossing them under your sink or in the cleaning closet. If you’ve ever thought about how to make a superior trash bag dispenser, we have the answer for you.PVC pipes are a great option for a number of different projects, including making your very own trash bag dispenser. PVC is an inexpensive, easy-to-work-with material that will be simple to install and maintain.There are a number of different tools and materials you will need to complete this project.
The size of the pipe you require will change depending on the size of your trash bags, so pick those out first!Once the pipe is held stable, begin marking the space you’ll be cutting into with a pencil. Begin by drawing a straight line along the length of the pipe, beginning and ending the pencil mark approximately inches inward from each end of the pipe. Afterwards, measure over about an inch and draw an identical line. Connect the two lines at each end to form a rectangle, and you’ve successfully marked the outline of your trash bag slot.Using your PVC glue, secure the PVC slip couplings onto each end of the PVC pipe. Make sure the ends of the slip couplings are flush with the ends of pipe.
Grab the remaining plug, which you drilled a hole through earlier, and thread a section of ¼ inch rope through the hole. Tie a knot at each end of the section of rope, and then push the plug securely into the open end of the PVC pipe. Pulling on the rope will make opening your PVC trash bag dispenser easier.Once your trash bag dispenser is complete, simply find a spot to mount it. The back of a cabinet door, inside your garage, and next to your trash can are all great ideas on where to mount your dispenser.There are a lot of different ways that you can customize your trash bag dispenser. For example, you can change the shape and size of the dispenser to work better for different things.
You could create a paper towel dispenser, a grocery bag holder, or even a dog waste bag dispenser using the same principles in this tutorial. The size and shape of the PVC will change to better fit these materials, so make sure you measure whatever will be dispensed before purchasing your PVC.To mount your dispenser, first mark the mounting hole locations with your pencil. Drill the appropriate-sized mounting holes into the surface where you will mount your dispenser.Once your mounting holes are drilled, hold the dispenser up, aligning the mounting holes on the pipe and the mounting surface. Then, using a screw gun, drive wood screws through the mounting holes to hang your dispenser, and you’re done!
