The strength of the FRPP pipe pvc ball valve hot melt interface is higher than that of the pipe body, and the joint will not be broken due to soil movement or load. The construction performance is good, the FRPP pipe material is light, the welding process is simple, the construction is convenient, and the overall cost of the project is low. We use the pressure and temperature information collected at the inlet and outlet of the gear pump to achieve online monitoring and feedback control of the entire extrusion process of FRPP pipe.
Linear extrusion characteristics can facilitate the coordination of upstream and downstream equipment. Due to the low leakage flow of the gear pump, the pump's delivery capacity is basically linear with the speed. After the gear pump's speed is changed, its flow rate can be accurately known, because the working speed of the upstream and downstream equipment and the gear pump can be determined. The frpp tube can be safely used for more than 50 years under rated temperature and pressure conditions.
FRPP pipes can withstand the corrosion of most chemicals, and can withstand the corrosion of high concentrations of acids and alkalis with a pH range of in a large range. It has good corrosion resistance to non-oxidizing acids hydrochloric acid, alkene sulfuric acid, hydrofluoric acid, dilute nitric acid, alkali and salt solutions.
When conveying ore slurry, the wear resistance of FRPP pipe is more than 4 times that of steel pipe. Stiffness performance, FRPP pipes are made of glass fiber reinforced materials to make frpp pipes difficult to deform, heat-resistant, heat-insulating and energy-saving. FRPP pipes have a high service temperature of about 95 degrees. The thermal conductivity of this product is only of the steel pipe, so it is better Insulation performance.
